If you are using this board version, you will have to use an external tool (for example the STM32 STLink utility) to program your code. The discovery board referenced STM32F429I- DISCO does not support the drag&drop and Virtual Comm Port features. Two different board references are available: STM32F429I- DISCO and STM32F429I- DISC1. You are ready to move to the Wi-Fi commissioning demonstration page.Support of STM32F429I-DISCO and DISC1 boards Press within 5 seconds to configure the demo. The application will go through the following stages before it is ready: Wait 5 seconds if you want to use the default settings. Watch the application’s progress on the Serial Terminal. Reset the NUCLEO board using the black button. Open a Serial Terminal application, such as PuTTY, configure it to the COM Port Number you found in the previous step, and set the UART settings to 115200 bps, 8 data bits, 1 stop bit and no parity. The device should be described with a similar label STMicroelectronics STLink Virtual COM Port.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |